Thursday, October 1, 2015

Arduino WiFi Shield 101 - SSL for $50

Arduino WiFi Shield 101 is a powerful IoT shield with crypto-authentication that connects your Arduino or Genuino board to the internet wirelessly. Connecting it to a WiFi network is simple, no further configuration in addition to the SSID and the password are required. The WiFI library allows you to write sketches which connect to the internet using the shield.

The shield is based on the Atmel SmartConnect-WINC1500 module, compliant with the IEEE 802.11 b/g/n standard. The WINC1500 module provided is a network controller capable of both TCP and UDP protocols.  The main feature is an hardware encryption/decryption security protocol provided by the ATECC508A CryptoAuthentication chip that is an ultra secure method to provide key agreement for encryption/decryption, specifically designed for the IoT market.

The WiFi Shield 101 is the first Arduino product fully supporting SSL and all the communication between your board and a secured server. With the power of the Arduino Zero and the WiFi Shield 101 it is possible to make secure IoT applications simply and just using the Arduino Language.

Wednesday, September 30, 2015

Arduino Pocket Simon

Remember the old Pocket Simon game? A fun game of memorization, you press the button that corresponds with the light and sound,and each time you get it right, it adds another to the sequence. Here is our Arduino version. It consists of 4 LED's, 4 buttons, 4 resistors, a Piezo element (speaker), all on a protoshield. We also included a Adafruit LiPo shield for wireless / rechargeable operation.

Tutorial - https://learn.sparkfun.com/tutorials/sik-experiment-guide-for-arduino---v32/experiment-16-simon-says




Igaging Micrometers and Calipers

I've added the Igaging SpeedMic and OriginCal to our list of Arduino connected Mitutoyo measurement equipment (Micrometer, Caliper, Dial Indicator, and DRO Scale). I made some improvements to our Mitutoyo Instructable to facilitate connection to the Igaging equipment. The Igaging SPC enabled gear is Mitutoyo compatible, using the same 52 bit data stream. It even uses a Mitutoyo SPC cable for connection (not the same cable as our Mitiyoyo Coolant protected Micrometer).

Igaging SpeedMic and OriginCal

Cable for Arduino

Discuss (Yahoo)
Discuss (Facebook)

Schematic






Now comes with a new professionally made board!







Order interface Boards (one for each axis):


Options:

Code:



int req = 5; //mic REQ line goes to pin 5 through q1 (arduino high pulls request line low)

int dat = 2; //mic Data line goes to pin 2

int clk = 3; //mic Clock line goes to pin 3

int i = 0; int j = 0; int k = 0;

byte mydata[14];

float num;

void setup() {

Serial.begin(9600);

pinMode(req, OUTPUT);

pinMode(clk, INPUT_PULLUP);

pinMode(dat, INPUT_PULLUP);

digitalWrite(req,LOW); // set request at LOW

}

void loop() { // get data from mic

digitalWrite(req, HIGH); // generate set request

for(i = 0; i < 13; i++ ) {

k = 0;

for (j = 0; j < 4; j++) {

while( digitalRead(clk) == LOW) {// hold until clock is high

}

while( digitalRead(clk) == HIGH) {// hold until clock is low

}

bitWrite(k, j, (digitalRead(dat) & 0x1)); // read data bits, and reverse order )

}

// extract data

mydata[i] = k;

}

// sign = mydata[4];

// decimal = mydata[11];

// units = mydata[12];

// assemble measurement from bytes

char buf[7];

for(int lp=0;lp<6;lp++)

buf[lp]=mydata[lp+5]+'0';

buf[6]=0;

num=atol(buf); //assembled measurement, no decimal place added

Serial.println(num/1000, 3); //add decimal

}


Related Posts Plugin for WordPress, Blogger...